NEC Univerge SV8100 Features And Specifications Manual page 405

UNIVERGE SV8100
Program
Program Name
Number
22-11-05 DID Translation Table Number
Conversion – Transfer
Destination Number 1
22-11-06 DID Translation Table Number
Conversion – Transfer
Destination Number 2
22-11-07 DID Translation Number
Conversion – Call Waiting
22-11-08 DID Translation Number
Conversion – Maximum
Number of DID Calls
22-11-09 DID Translation Number
Conversion – Music On Hold
Source
22-11-10 DID Translation Number
Conversion – ACI Music
Source Port
22-11-11 DID Translation Number
Conversion – Ring Group
Transfer
SV8100 Features and Specifications Manual
Description/Comments
Use to define the 1st transfer
destination for each tables received
number.
400 = Allows the outside party to dial
a different extension number in the
translation table (for example, ring
no answer to a dialed number, the
caller then hears a dial tone,
allowing them to enter another Valid
Extension Number).
401 = Provides the caller with DISA
dialing options (requires using the
DISA password).
Note: This applies to 22-11-05 and
22-11-06.
If the Transfer Destinations are
busy or receive no answer,
those calls are transferred to
the final transfer destination
(Program 22-10).
For each DID Translation Table
entry (1~2000), specify whether or
not Call Waiting should be allowed
(0 = Disable, 1 = Enable).
For each DID Translation Table
entry (1~2000), specify the
maximum number of DID calls.
For each DID Translation Table
entry (1~2000), specify the source of
music to be used for DID trunks.
For each DID Translation Table
entry (1~2000), if item 2 is selected
in Program 22-11-09, specify the
port to be used for the source of
music heard on DID trunks.
Enable (1) or disable (0) each
conversion table to follow the Ring
Group programming defined in
Program 22-12-01 : DID Intercept
Ring Group. If Program 22-11-05 :
DID Translation Number
Conversion, Transfer Destination
Number 1 and Program 22-11-06 :
DID Translation Number
Conversion, Transfer Destination
Number 2 are set, the priority of
transferring is in this order: Program
22-11-05 then Program 22-11-06
then if Program 22-11-11 is enabled,
Program 22-12-01.
Assigned Data
0 = No Setting
1~100 = Incoming Group
101 = (Not Used)
102 = In-Skin/External
Voice Mail or In-Mail
201~264 = Extension
Group
400 = Valid Extension
Number
401 = DISA
501~548 = DISA/VRS
Message
1000~1999 = Speed
Number
(000~999)
(default = 0)
0 = Disable (No)
1 = Enable (Yes)
(default = 0)
0~200 (0 = No Limit)
(default = 0)
0 = IC/MOH Port
1 = BGM Port
2 = ACI Port
(default = 0)
When a sound source
type is 2 in above :
(0~96)
(default = 0)
1~2000
0 = Disable (Caller hears
Ringback)
1 = Enable (Go to normal
ring)
(default = 0)
Issue 1.0
Level
1 2 3
2 - 381