NEC Univerge SV8100 Features And Specifications Manual page 1105

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-11-41 Service Code Setup (for Setup/
Entry Operation) – Tandem
Ringing
15-07-01 Programmable Function Keys
30-03-01 DSS Console Key Assignment
Operation
To set up Tandem Ringing:
1. Press Speaker at the extension considered to be the master telephone (optional).
2. Press the Tandem Ringing key (Program 15-07 or SC 751: 80).
3. Dial 1 to set the feature.
4. Enter the extension number to be considered the slave telephone (the telephone that rings when the
master extension rings).
A confirmation tone is heard (if Speaker was used).
SV8100 Features and Specifications Manual
Description/Comments
Define a service code to be used to
set up Tandem Ringing.
Assign a function key for Tandem
Ringing (code 80).
Assign a DSS function key for
Tandem Ringing (code 80).
Assigned Data
MLT, SLT
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Key Number
001~500
0~99 (General Functional
Level)
97 = Door Box Access
key (additional data: 1~8
Door Box No.)
00 ~ 99
(Appearance Functional
Level)
Issue 1.0
Level
1 2 3
2 - 1081