NEC Univerge SV8100 Features And Specifications Manual page 546

Issue 1.0
Program
Program Name
Number
11-11-20 Service Code Setup (for Setup/
Entry Operation) – Change
Incoming CO and ICM Ring
Tones
11-11-21 Service Code Setup (for Setup/
Entry Operation) – Check
Incoming Ring Tones
11-11-22 Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
11-11-23 Service Code Setup (for Setup/
Entry Operation) – Second Call
for DID/DISA/DIL
11-11-24 Service Code Setup (for Setup/
Entry Operation) – Change
Station Class of Service
11-11-25 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each
Extension
Group
11-11-26 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
11-11-27 Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
11-11-28 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer for Every Extension
Group
11-11-29 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer Cancellation for Each
Extension Group
11-11-30 Service Code Setup (for Setup/
Entry Operation) – DND Setup for
Each Extension Group
11-11-31 Service Code Setup (for Setup/
Entry Operation) – DND
Cancellation for Each Extension
Group
11-11-33 Service Code Setup (for Setup/
Entry Operation) – Dial Block
2 - 522
Description/Comments
Use to customize the change
incoming CO and ICM ring tones
used for registration and setup.
Use to check incoming ring tones
used for registration and setup.
Use to customize the Extension
name programming used for
registration and setup.
Use to customize the second call
of DID/DISA/DIL used for
registration and setup.
Allows an extension user to
change the COS of another
extension. Must be allowed in
Program 20-13-28.
Customize the service code to be
used to set the Automatic Trunk
Forwarding feature for a
Department Group.
Customize the service code to be
used to cancel the Automatic
Trunk Forwarding feature for a
Department Group.
Customize the service code to be
used to set the destination for the
Automatic Trunk Forwarding
feature for a Department Group.
Use to customize the delayed
transfer for every extension group
used for registration and setup.
Use to customize the delayed
transfer cancellation for each
extension group used for
registration and setup.
Use to customize the Service
Codes which are used for
registration and setup.
Use to customize the DND
cancellation for each extension
group used for registration and
setup.
Use to customize the dial block
used for registration and setup.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 720)
MLT
(default = 711)
MLT
(default = 700)
MLT
(default = 679)
MLT
(default = 677)
MLT, SLT
(default = 602)
MLT, SLT
(default = 603)
MLT
(default = 604)
MLT, SLT
(default = 605)
MLT, SLT
(default = 606)
MLT, SLT
(default = 607)
MLT, SLT
(default = 608)
MLT, SLT
(default = 600)
Flexible System Numbering
Level
2 3