NEC Univerge SV8100 Features And Specifications Manual page 1284

Issue 1.0
Program
Program Name
Number
16-01-05 Department Group Basic Data
Setup – Extension Group All Ring
Mode Operation
16-01-06 Department Group Basic Data
Setup – STG Withdraw Mode
16-01-07 Department Group Basic Data
Setup – Call Recall Restriction for
STG
16-01-09 Department Group Basic Data
Setup – Department Hunting No
Answer Time
16-01-10 Department Group Basic Data
Setup – Enhanced Hunt Type
16-02-01 Department Group Assignment
for Extensions
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
20-03-01 System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
20-06-01 Class of Service for Extensions
2 - 1260
Description/Comments
Set if all members of the group
should ring automatically (1) or
through the use of the service code
(0) defined in Program 11-12-09.
Selecting automatic will override
the settings of Programs 16-01-03
and 16-01-04.
Use to set the STG withdraw mode
for each department group.
Determine whether or not an
unanswered call transferred to a
Department Group should recall the
extension from which it was
transferred.
Set how long a call rings a
Department Group extension
before hunting occurs.
Set the type of hunting for each
Extension (Department) Group.
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Enable (1) disconnect supervision
for the system.
For a busy single line (500/2500
type) telephone, set the mode used
to answer a camped-on trunk call.
The default setting should be used
[0 = Hookflash (Hooking)].
Assign a Class of Service (1~15) to
the voice mail extensions. You
should use COS 14 for all time
modes.
UNIVERGE SV8100
Assigned Data
0 = Manual
1 = Automatic
(default = 0)
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
(default = 0)
0 = Disable (Recall)
1 = Enable (No Recall)
(default = 0)
64800 (seconds)
(default = 15 seconds)
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not
Answered
3 = Hunting When Busy
or No Answer
(default = 0)
Department Groups
1-64
Priority 1-512
Default = All extensions
in Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
0 = Disable
1 = Enable
(default = 1)
0 = Hookflash (Hooking)
1 = Hookflash + Service
Code 654
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
Voice Mail Integration (Analog)
Level
1 2 3