NEC Univerge SV8100 Features And Specifications Manual page 1321

UNIVERGE SV8100
4. Dial the VRS message number you want to record (01~48).
5. When you hear, "Please start recording" followed by a beep, record your message.
6. Press to end recording
#
- OR -
Hang up to save the message.
To listen to a previously recorded VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 616.
3. Dial 5 (Listen).
4. Dial the VRS message number to which you want to listen (01~48).
You hear the previously recorded message. If you hear a beep instead, no previous message is recorded.
5. Press to hear the message again.
#
- OR -
To hear another message, dial 5 and then enter the message number (01~48).
- OR -
Hang up.
To erase a previously recorded VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 616.
3. Dial 3 (Erase).
4. Dial the number of the VRS message you want to erase (01~48).
5. Press Hold (multiline terminal only) to cancel the procedure without erasing (and return to step 3).
- OR -
Hang up to erase the message.
To record, listen to or erase a VRS message if you call in using DISA:
1. Place call to the system.
You hear dial tone.
2. After the system answers, dial the DISA password (normally 000000).
You hear dial tone.
SV8100 Features and Specifications Manual
Issue 1.0
2 - 1297