NEC Univerge SV8100 Features And Specifications Manual page 1223

UNIVERGE SV8100
To start a conference call using outside DIT:
1. Call a trunk that is set as DIT to Conference Bridge.
2. When the voice prompt is heard, enter the Conference Bridge 1 or 2 password, and dial #.
3. Start the conference.
To start a conference call on an incoming CO call using an Automated Attendant:
1. Call a trunk that is set as an Automated Attendant.
2. Select the option for an extension connected to the Conference Bridge.
3. When the voice prompt is heard, enter the Conference Bridge 1 or 2 password, and dial #.
4. Start the conference.
To start a conference call from an incoming CO call using an Attendant:
1. Call the Attendant, and ask to be transferred to an extension connected to the Conference Bridge.
2. When the voice prompt is heard, enter the Conference Bridge 1 or 2 password, and dial #.
3. Start the conference.
SV8100 Features and Specifications Manual
Issue 1.0
2 - 1199