NEC Univerge SV8100 Features And Specifications Manual page 1126

Issue 1.0
Program
Program Name
Number
10-12-03 CD-CP00-AU Network Setup –
Default Gateway
10-20-01 LAN Setup for External
Equipment – TCP Port
Operation
TAPI operation is automatic once programmed in the telephone system and enabled in the PC TAPI
application, unless a headset is used.
Using the Headset with Automatic Answer:
1. With the multiline terminal in an idle state, press the Help key.
2. Press the Headset key (Program 15-07 or SC 751: 05) twice.
3. Press the Exit key to return the display to idle.
The Headset key blinks when Automatic Headset is activated.
To cancel Automatic Headset, repeat these steps.
To redirect calls to the headset and disable the hookswitch (required for some TAPI features):
1. With the multiline terminal in an idle state, press the Help key.
2. Press the Headset key (Program 15-07 or SC 751: 05) twice.
3. Press the Exit key to return the display to idle.
The Headset key blinks when Automatic Headset is activated.
To cancel Automatic Headset, repeat these steps.
4. Press the Headset key (Program 15-07 or SC 751: 05) to go Off-Hook.
2 - 1102
Description/Comments
Assign the default gateway IP
address for the CD-CP00-AU.
Use to define the TCP port/
address/etc. for communicating to
external equipment.
UNIVERGE SV8100
Assigned Data
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.254.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
0~65535
default:
External Device 1 (CTI)
= 0
External Device 2 (ACD
MIS) = 4000
External Device 5
(SMDR Output) = 0
External Device 6 (DIM
Output) = 0
External Device 11
(O&M Server) = 8010
TAPI Compatibility
Level
1 2 3