NEC Univerge SV8100 Features And Specifications Manual page 516

Issue 1.0
Program
Program Name
Number
20-07-03 Class of Service Options
(Administrator Level) – Time
Setting
20-07-04 Class of Service Options
(Administrator Level) – Storing
Speed Dialing Entries
20-07-05 Class of Service Options
(Administrator Level) – Set/
Cancel Automatic
Trunk-to-Trunk Transfer
20-07-10 Class of Service Options
(Administrator Level) –
Programmable Function Key
Programming (Appearance
Level)
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
20-07-12 Class of Service Options
(Administrator Level) – Trunk
Port Disable
20-07-13 Class of Service Options
(Administrator Level) – VRS
Record (VRS Msg Operation)
20-07-14 Class of Service Options
(Administrator Level) – VRS
General Message Play
20-07-15 Class of Service Options
(Administrator Level) – VRS
General Message Record/Delete
2 - 492
Description/Comments
Turns Off or On an extension user
ability to set the Time via Service
Code 728.
Turns Off or On an extension to
store System or Group Speed
Dialing numbers.
Turns Off or On an extension user
ability to use the Trunk-to-Trunk
Forwarding service codes.
Turns Off or On an extension user
ability to program the Appearance
function keys using Service Code
752.
Turns Off or On an extension user
ability to use Forced Trunk
Disconnect. This allows the
extension to disconnect an
Unsupervised Conference in
progress.
Turns Off or On an extension user
ability to use the Trunk Port Disable
feature.
Turns Off or On an extension ability
to record, erase or listen to VRS
messages.
Turns Off or On an extension user
ability to dial 4 or Service Code 611
to listen to the General Message.
Turns Off or On an extension user
abilityto dial Service Code 612 and
record, listen to, or erase the
General Message.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for COS
01~15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
term
series i Multiline Terminals
D
Level
1 2 3