NEC Univerge SV8100 Features And Specifications Manual page 974

Issue 1.0
Program
Program Name
Number
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction for
Tandem Trunking on Hang Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-12-02 Class of Service Options
(Charging Cost Service) – Advice
of Charge
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
20-13-01 Class of Service Options
(Supplementary Service) – Long
Conversation Alarm
20-13-02 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Incoming)
20-13-03 Class of Service Options
(Supplementary Service) – Long
Conversation Cutoff (Outgoing)
20-13-04 Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
2 - 950
Description/Comments
Allow (0) or Deny (1) an extension
users's ability to set up a tandem/
conference call automatically when
they hang up.
Allow or Deny an extensions ability
to initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
In an extension Class of Service,
turns On (1) or Off (0) the ability to
set and cancel Call Forwarding for
a CAR or Virtual Extension.
Set the hold type when a trunk call
is put on hold by an extension.
Turns On or off an extensions
ability to transfer a parked call.
ISDN-AOC
This option Turns Off (0) or On (1) a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
ISDN billing information.
Turns Off (0) or On (1) the Warning
Tone for Long Conversation (not for
single line telephones).
Turns Off or On an extension ability
to use Long Conversation Cutoff for
incoming calls.
Turns Off or On an extension ability
to use Long Conversation Cutoff for
outgoing calls.
Turns On or Off the ability to use
Call Forwarding/DND Override.
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold (On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
SLT Adapter
Level
1 2 3