NEC Univerge SV8100 Features And Specifications Manual page 763

UNIVERGE SV8100
Related Features
Speed Dial – System/Group/Station
Caller ID
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Station Message Detail Recording
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-02-01 Extension Numbering
11-10 Service Code Setup (for System
Administrator)
11-11 Service Code Setup (for Setup/
Entry Operation)
SV8100 Features and Specifications Manual
Description/Comments
The Mobile Extension port must
be an unequipped extension port
on the SV8100 system. This
extension port is directed to an
Abbreviated Dial bin.
Used to customize the System
Administrator service codes.
Used to customize the service
code for Setup and Entry.
Assigned Data
Up to eight digits
1 101
2 102
3 103
~ ~
99 199
100 3101
~ ~
512 3513
Please refer to the
SV8100 Programming
Manual for more
information on this
program.
Please refer to the
SV8100 Programming
Manual for more
information on this
program.
Issue 1.0
Level
1 2 3
2 - 739