NEC Univerge SV8100 Features And Specifications Manual page 1080

Issue 1.0
Program
Program Name
Number
20-11-16 Class of Service Options (Hold/
Transfer Service) – Call Redirect
20-11-17 Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-12-02 Class of Service Options
(Charging Cost Service) – Advice
of Charge
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
2 - 1056
Description/Comments
Turns On (1) or Off (0) a multiline
terminal user's ability to transfer a
call to a predefined destination
(such as an operator, voice mail, or
another extension) without
answering the call.
Turns On (1) or Off (0) the ability of
an extension in a Department Group
to use the Trunk-to-Trunk
Forwarding service codes.
Allow (0) or Deny (1) answered
Transferred calls from recalling the
originating extension.
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06, 1
= Extended for Program 24-01-07).
Turns Off or On an extension ability
to receive Callbacks.
Allow (0) or Deny (1) an extension
users's ability to set up a tandem/
conference call automatically when
they hang up.
Allow or Deny an extensions ability
to initiate a Trunk-to-Trunk Transfer
(Tandem Trunking).
In an extension Class of Service,
turns On (1) or Off (0) the ability to
set and cancel Call Forwarding for a
CAR or Virtual Extension.
Set the hold type when a trunk call is
put on hold by an extension.
Turns On or off an extensions ability
to transfer a parked call.
ISDN-AOC
This option Turns Off (0) or On (1) a
DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or
Automatic Route Selection.
ISDN billing information
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold (On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
SV8100/SV8300 Terminals
Level
2 3