NEC Univerge SV8100 Features And Specifications Manual page 544

Issue 1.0
Program
Program Name
Number
11-10-25 Service Code Setup (for System
Administrator) – Account Code
Accumulated Printout Code
11-10-26 Service Code Setup (for System
Administrator) – Forced Trunk
Disconnect
11-10-27 Service Code Setup (for System
Administrator) – Trunk Port
Disable for Outgoing Calls
11-10-30 Service Code Setup (for System
Administrator) – Register
DECTPP
11-10-31 Service Code Setup (for System
Administrator) – Delete DECTPP
11-10-32 Service Code Setup (for System
Administrator) – Set Private Call
Refuse
11-10-33 Service Code Setup (for System
Administrator) – Entry Caller ID
Refuse
11-10-34 Service Code Setup (for System
Administrator) – Set Caller ID
Refuse
11-10-35 Service Code Setup (for System
Administrator) – Dial-In Mode
Switching
11-10-36 Service Code Setup (for System
Administrator) – Change the
Guidance Message Number on
Voice Mail Auto Attendant
11-11-01 Service Code Setup (for Setup/
Entry Operation) – Call Forward –
All
11-11-02 Service Code Setup (for Setup/
Entry Operation) – Call Forward –
Busy
11-11-03 Service Code Setup (for Setup/
Entry Operation) – Call Forward –
No Answer
11-11-04 Service Code Setup (for Setup/
Entry Operation) – Call Forward –
Busy/No Answer
2 - 520
Description/Comments
Use to customize the account code
accumulated printout Service
Codes for the System
Administrator.
Use to customize the forced trunk
disconnect Service Codes for the
System Administrator.
Define the service code which
should be used by an extension
user to block a trunk from being
used for outgoing calls.
Use to customize the register
DECTPP Service Codes for the
System Administrator.
Use to customize the delete
DECTPP Service Codes for the
System Administrator.
Use to customize the set private
call refuse Service Codes for the
System Administrator.
Use to customize the entry caller
ID Service Codes for the System
Administrator.
Use to customize the set caller ID
refuse Service Codes for the
System Administrator.
Use to customize the forced trunk
disconnect Service Codes for the
System Administrator.
Use to change the guidance
message number on voice mail
auto attendant Service Codes for
the System Administrator.
Set the service code for setting call
forwarding all calls.
Set the service code for setting call
forwarding for busy calls.
Set the service code for setting call
forwarding for no answer.
Set the service code for setting call
forwarding for busy or no answer.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 623)
MLT, SLT
(default not assigned)
MLT, SLT
(default = 645)
MLT
(default not assigned)
MLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT, SLT
(default = 741)
MLT, SLT
(default = 742)
MLT, SLT
(default = 743)
MLT, SLT
(default = 744)
Flexible System Numbering
Level
2 3