NEC Univerge SV8100 Features And Specifications Manual page 1192

Issue 1.0
For Either Method:
Program
Program Name
Number
11-12-42 Service Code Setup (for Service
Access) – Flash on Trunk Lines
22-04-01 Incoming Extension Ring Group
Assignment
22-08-01 DIL/IRG No Answer Destination
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
45-01-01 Voice Mail Integration Options –
Voice Mail Department Group
Number
45-01-02 Voice Mail Integration Options –
Voice Mail Master Name
45-01-04 Voice Mail Integration Options –
Park and Page
2 - 1168
Description/Comments
Program the dial access code to
use for sending a hook flash to
Telco. This code is used for
Centrex Transfer using Digital
Voice Mail ports. If this code starts
#
with , Program 45-01-05 must be
set to 0 (Off).
To enable Voice Mail Overflow,
assign selected extensions to a
Ring Group that ring for
unanswered DILs to Voice Mail
ports. In Program 22-06, enter 1 to
enable overflow ringing.
For Voice Mail Overflow, enter the
Ring Group that unanswered DILs
to Voice Mail ring after the DIL Call
Waiting time (Program 22-01-04).
Set the interval a transferred call
waits at a forwarded extension
before routing to the called
extension mailbox.
Assign which Extension
(Department) Group number is to
be assigned as the voice mail
group. This program defines the
Quick Transfer to Voice Mail
destination. An entry of '0' means
there is no voice mail installed.
Department Groups: 0, 1~64
Enter the Voice Mail master name
up to 12 characters.
Enable (1) or disable (0) the system
ability to process the Voice Mail
Park and Page ( ) commands. You
should normally enable this option.
UNIVERGE SV8100
Assigned Data
SLT
#
(default = 3)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
0~64800 (seconds)
(default = 10)
0~64
0 = No Voice Mail
(default = 0)
Up to 12 Characters
(default = Voice Mail)
0 = Off
1 = On
(default = 1)
UM8000 Mail
Level
1 2 3