NEC Univerge SV8100 Features And Specifications Manual page 1360

Issue 1.0
For this feature...
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker first).
Paging, External
Paging, External
Night Service
Paging, Internal
Park
Programmable
Function Keys
Save Number Dialed
Selectable Display
Messaging
Selectable Ring Tones
System Programming
Password Protection
3 - 20
Dial this Service Code...
703 + zone (1~8)
703 + zone (0)
780 + relay number (0~8)
701 + zone (1~8, 1~9 or
01~64)
701 + zone (0 or 00)
#6 + orbit (01~64)
6 + orbit (01~64)
757
751 + key + code
752 + key + code
715
785
4 + 3 + message (01~20),
or
4 + 3 + Hang up to cancel
711 + 1 (ICM) or 2 (Trk) +
tone (1~8)
720 + 1 (ICM) + 2 (Trk) +
tone (1~8)
# #
1
When you are...
Making an external zone page
Making an external All Call page
Activating the general purpose relay.
Making an Internal Zone Page
Making an internal All Call Page
Parking a call in a system Park orbit
(01~64)
Picking up a call parked in a system
Park orbit (01~64)
Parking a call or picking up a parked
call at an extension
Changing the function of a
programmable key using 751 service
codes
Changing the function of a
programmable key using 752 service
codes
Saving a number (from SLT) or dialing
a saved number
Clearing the number saved by Save
Number Redial number
Activating and Canceling Selectable
Display Messaging
Listening to the incoming ring choices
Changing your extension's incoming
ring tones
Entering the system programming
mode
UNIVERGE SV8100
Also see
Function
Key...
19 + zone
20
51
21 + zone or
22
04 + orbit
04 + orbit
-
-
-
30
-
17
-
-
-
Codes Tables