NEC Univerge SV8100 Features And Specifications Manual page 1018

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-11-22 Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
15-01-01 Basic Extension Data Setup –
Extension Name
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-13-21 Class of Service Options
(Supplementary Service) –
Extension Name
Operation
To program your extension name:
1. Press Speaker.
2. Dial 700.
- OR -
Press the Extension Name Change key (Program 15-07 or SC 751: 55).
3. Press Hold.
2 - 994
Description/Comments
Use to customize the extension
name programming used for
registration and setup.
Define the extension/virtual
extension name.
Assign an Extension Name
Change key (55) to extensions.
Assign a Class of Service (1~15) to
an extension.
Turns Off (0) or On (1) an
extension user ability to program
its name.
Station Name Assignment – User Programmable
UNIVERGE SV8100
Assigned Data
MLT
(default = 700)
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102, etc.
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Level
1 2 3