NEC Univerge SV8100 Features And Specifications Manual page 1258

Issue 1.0
Program
Program Name
Number
47-02-10 VM8000 InMail Station Mailbox
Options – Forced Unscreened
Transfer
47-02-11 VM8000 InMail Station Mailbox
Options – Auto Time Stamp
47-02-12 VM8000 InMail Station Mailbox
Options – System Administrator
47-02-13 VM8000 InMail Station Mailbox
Options – Dialing Option
47-02-14 VM8000 InMail Station Mailbox
Options – Next Call Routing
Mailbox
47-02-15 VM8000 InMail Station Mailbox
Options – Directory List
47-03-01 VM8000 InMail Group Mailbox
Options – Master Mailbox Active
2 - 1234
Description/Comments
Use this option to Enable or Disable
Automated Attendant Forced
Unscreened Transfer for the
Subscriber Mailbox. If enabled, each
Screened Transfer (TRF) to the
extension is converted to an
Unscreened Transfer (UTRF). If
disabled, Screened Transfers from
the Automated Attendant occur
normally.
Stamp for the Subscriber Mailbox. If
enabled, after the subscriber listens
to a message VM8000 InMail
announces the time and date the
message was left. Auto Time Stamp
also announces the message
sender (if known).
A subscriber can also enable Auto
Time Stamp from their mailbox.
Use this option to designate the
Subscriber Mailbox as a System
Administrator. This allows the
subscriber to use the SA options
after logging onto their mailbox.
Dialing Option provides additional
dialing options for Next Call Routing
Mailbox calls (see Next Call Routing
Mailbox below). If enabled, a caller
who accesses the Subscriber
Mailbox to leave a message can dial
any of the options in the Next Call
Routing Mailbox Dial Action Table. If
disabled, the caller can dial only 0
(to use the Next Call Routing
Mailbox 0 action).
Use this option to assign a Next Call
Routing Mailbox to the Subscriber
Mailbox. This provides callers with
additional dialing options while
listening to a Subscriber Mailbox
recorded or default greeting. The
digits the caller can dial depends on
the setting of the Next Call Routing
Mailbox and Alternate Next Call
Routing Mailbox options.
Use to set up a station/extension
mailbox directory list.
Use this option to Enable or Disable
the Master Mailbox. A Master
Mailbox is not accessible when it is
disabled.
UNIVERGE SV8100
Assigned Data
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
Default:
Mailbox 1 (101)=1
Other mailboxes=0
0 = Disable
1 = Enable
(default = 0)
Call Routing Mailbox
Number (1~3 digits,
01~016) No entry (Entered
by pressing CLEAR)
Default:
1 (Call Routing Mailbox
01)
By default, Call
Routing Mailbox
numbers are 01~08
0 = None
1~8 = List Number
= All
(default = 0)
0 = Disable
1 = Enable
(default = 0)
VM8000 InMail
Level
1 2 3