NEC Univerge SV8100 Features And Specifications Manual page 658

Issue 1.0
Program
Program Name
Number
10-12-11 CD-CP00-AU Network Setup –
NIC Setup
10-19-01 VoIP DSP Resource Selection
10-23-01 SIP System Interconnection
Setup – System Interconnection
10-23-02 SIP System Interconnection
Setup – IP Address
10-23-04 SIP System Interconnection
Setup – Dial Number
10-28-01 SIP System Information Setup –
Domain Name
10-28-02 SIP System Information Setup –
Host Name
10-28-03 SIP System Information Setup –
Transport Protocol
10-28-04 SIP System Information Setup –
User ID
2 - 634
Description/Comments
Use this program to define the
LAN interface Speed and Mode of
the VoIP Application supported.
Select type of IPLA DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
Used to determine if the system is
interconnected to another system.
Use this program to define the IP
Address of the SIP System
Interconnection.
Use this program to define Dial
Number for the SIP System
Interconnection.
Use this program to define the
Domain name. This information is
generally provided by the SIP
carrier.
Use this program to define the
Domain name. This information is
generally provided by the SIP
carrier.
Use this program to define the
Transport type. This option is
always set to UDP.
Use this program to define the
User ID.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
0 = Auto Detect
1 = 100 Mbps, Full
Duplex
2 = 100 Mbps, Half
Duplex
3 = 10 Mbps, Full Duplex
4 = 10 Mbps, Half Duplex
(default = 0)
0 = Common
1 = IP Extension
2 = SIP Trunk
3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
0 = No (Disable)
1 = Yes (Enable)
(default = 0)
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
Up to 12 digits (0~9)
(default not assigned)
Up to 64 Characters
(default not assigned)
Up to 48 Characters
(default not assigned)
0 = UDP
1 = TCP
(default = 0)
Up to 32 Characters
When assigning the User
ID, the ID may contain
only alpha characters. (A
space and/or special
characters are not
allowed in the User ID
field).
(default not assigned)
Level
1 2 3