NEC Univerge SV8100 Features And Specifications Manual page 1129

UNIVERGE SV8100
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) – Second
Call for DID/DISA/DIL/E&M
Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-34 Class of Service Options
(Supplementary Service) – Block
Manual Off-Hook Signaling
20-13-35 Class of Service Options
(Supplementary Service) – Block
Camp On
20-18-06 Service Tone Timers – Interval of
Call Waiting Tone
80-01-01 Service Tone Setup – Basic Tone
(39) Number
80-01-02 Service Tone Setup – Ring Busy
(39) Tone
SV8100 Features and Specifications Manual
Description/Comments
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
For each extension Turns Off (0) or
On (1) the extensions ability to
have multiple calls queued at the
extension. If Allowed, Tone
Override is automatic. Refer to
Program 20-13-06.
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
automatically (1) or manually (0)
receive Off-Hook Signals.
Turns Off (0) or On (1) an extension
ability to block Off-Hook signals
manually sent from a co-worker.
Use this option to Turns On (1) or
Off (0) extension ability to block
#
callers from dialing to camp-on.
Use this timer to set the interval
between Off-Hook Signaling alerts.
Used to customize the service
tones in the system. Tone Override
is tone 39.
Define Ring Busy Tone.
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10 seconds)
0~255 (default 0 = until
On-Hook)
Refer to Table 2-14
Service Tone Setup,
Program 80-01-01 on
page 2-555
Refer to Table 2-15
Service Tone Setup,
Program 80-01-02 on
page 2-558
Issue 1.0
Level
1 2 3
2 - 1105