NEC Univerge SV8100 Features And Specifications Manual page 1269

UNIVERGE SV8100
Program
Program Name
Number
80-03-01 DTMF Tone Receiver Setup –
Detect Level
80-04-01 Call Progress Tone Detector Setup
– Detect Level
ACD Delay Announcement:
Only use if Master Mailboxes will be used for ACD Delay Announcements.
Program
Program Name
Number
41-19-01 ACD Voice Mail Delay
Announcement – Delay Message
Start Timer
41-19-02 ACD Voice Mail Delay
Announcement – Mailbox
Number for 1st Announcement
Message
41-19-03 ACD Voice Mail Delay
Announcement – 1st Delay
Message Sending Count
41-19-04 ACD Voice Mail Delay
Announcement – Mailbox
Number for 2nd Announcement
Message
41-19-05 ACD Voice Mail Delay
Announcement – 2nd Delay
Message Sending Count
SV8100 Features and Specifications Manual
Description/Comments
Use these programs to set the
criteria for DTMF dial, ringback and
busy tones.
Define the various levels and timers
for the Call Progress Tone Detector.
Use this option to set the Detection
Level.
Description/Comments
Determine how long the system
waits before playing the Delay
Message.
Assign Voice Mail ACD
Announcement Mailbox as the
message source for the 1st
Announcement Message.
Determine the 1st Delay Message
Sending Count. This entry must be
set to 1 or higher in order for the
message to play.
Assign Voice Mail ACD
Announcement Mailboxes as the
message source for the 2nd
Announcement Message.
Determine the 2nd Delay Message
Sending Count. This entry must be
set to 1 or higher in order for the
message to play.
Assigned Data
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default: Type 1~5 = 0
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default:
Type 1 (DT) – 0
(-25dBm)
Type 2 (BT) – 0
(-25dBm)
Type 3 (RBT) – 0
(-25dBm)
Type 4, Type 5 – 0
Assigned Data
0 ~ 64800 (sec.)
(default = 0)
Dial
(up to eight digits)
(default not assigned)
0 = No message is
played.
1 ~ 255
(default = 0)
Dial
(up to eight digits)
(default not assigned)
0 = No message is
played.
1 ~ 255
(default = 0)
Issue 1.0
Level
1 2 3
Level
1 2 3
2 - 1245