NEC Univerge SV8100 Features And Specifications Manual page 713

UNIVERGE SV8100
Conditions
This can be used only twice for each UNIVERGE SV8100 CD-CP00-AU.
When the Promo License is generated, it gives the date that the license ends (30 days
include the day generated).
If the date is changed in PRG 10-01-XX, while the license is in effect, to a date before the
generated date it subtracts one day from the Promo license.
If the date is changed in PRG 10-01-XX, while the license is in effect, to a date after the
generated date, it runs until the End Date specified when the License was generated.
If the date is changed in PRG 10-01-XX, while the license is in effect, to a date after the End
Date specified when the License was generated, the system resets when it is applied
(transfer key pressed), not when exiting program mode.
When the System time turns to midnight of the End Date, the system resets and comes back
with no licenses.
The 30 Day Promo License can only be activated from PCPro or WebPro, not a Multiline
Terminal.
If any CD-CP00-AU license is activated when the Promo licensing is being used, the
CD-CP00-AU license resets with only the activated license(s).
Default Settings
No licensing.
System Availability
Terminals
N/A
Required Component(s)
Refer to the particular Feature for required component(s)
Related Features
Programming from Multiline Terminal
SV8100 Features and Specifications Manual
Issue 1.0
2 - 689