NEC Univerge SV8100 Features And Specifications Manual page 1260

Issue 1.0
Program
Program Name
Number
47-06-05 Group Subscriber Mailbox Options
– Recording Conversation Beep
47-06-06 Group Subscriber Mailbox Options
– Message Waiting Lamp
47-06-07 Group Subscriber Mailbox Options
– Auto Attendant Do Not Disturb
2 - 1236
Description/Comments
Use this option to Enable or Disable
the Conversation Record beep. If
enabled, all parties on a call hear the
voice prompt Recording followed by
a single beep when the extension
user initiates Conversation Record.
If disabled, the voice prompt and
beep do not occur. When you
disable the Conversation Record
beep, the following voice prompts do
not occur while VM8000 InMail
records the conversation:
Recording (followed by a beep) That
mailbox is full (if the mailbox
message storage capacity is
reached)
You have reached the recording limit
(if the recorded message is too long)
The SV8100 telephone system
software provides an additional
Conversation Record beep. This
beep repeats according to the
setting of Program 45-01-06: Voice
Mail Integration Options: Record
Alert Tone Interval Time (0~64800
seconds). To disable the SV8100
telephone system Conversation
Record beep, enter 0 for this option.
Use this option to Enable or Disable
Message Waiting light at the
extension associated with the
Subscriber mailbox. For Subscriber
Mailboxes, you should leave this
option enabled. For Guest
Mailboxes, you should leave this
option disabled.
Use this option to Enable or Disable
Auto Attendant Do Not Disturb.
When a subscriber enables Auto
Attendant Do Not Disturb, an
Automated Attendant caller routes
directly to the mailbox, hears the
greeting, and is asked to leave a
message. A subscriber can also
enable Auto Attendant Do Not
Disturb while recording their mailbox
greeting.
UNIVERGE SV8100
Assigned Data
0 = No (Disabled)
1 = Yes (Enabled)
(default = 1)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 0)
VM8000 InMail
Level
1 2 3