NEC Univerge SV8100 Features And Specifications Manual page 487

UNIVERGE SV8100
Program
Program Name
Number
20-13-47 Class of Service Options
(Supplementary Service) – Station
Number Display
20-13-48 Class of Service Options
(Supplementary Service) – Station
Name Display
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
20-13-50 Class of Service Options
(Supplementary Service) – AIC
Agent display which call is from
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name appear in the
directory
Operation
term
To program the D
1. Press and hold down
2. Press R/VOL repeatedly to scroll through the line key (LK) and feature options for function key F1.
3. Press MUTE to select the displayed line key or feature.
4. When a Line Key is assigned, press MUTE once to enter the Off-Hook Ringing ON or OFF Mode.
Press R/VOL to toggle between /TALK for ON or /NO TALK for OFF.
5. Press MUTE to advance to the next function key (F2 ~ F4).
6. After programming F4, press MUTE to advance to Global Off-Hook Ringing Assignment.
7. Press R/VOL to turn Global Off-Hook Ringing ON/OFF (LCD indicates ON or OFF).
8. Press TALK to exit.
Function keys F1 ~ F4 can be programmed as Line Keys 1~16, Redial (LNR/SPD), Answer (ANS), Feature (FNC),
or Recall. When assigned, these keys operate the same as on an NEC Multiline Terminal.
When initially installed, function keys F1~F4 default to Line Keys 1~4 respectively and Off-Hook Ringing defaults
to ON.
Global Off-Hook Ringing must be ON (default) for any Function key to work with Off-Hook Ringing.
SV8100 Features and Specifications Manual
Determine if a station Number is
displayed (On) or not displayed (Off)
in the LCD when the phone is idle.
Determine if a station Number is
displayed (On) or not displayed (Off)
in the LCD when the phone is idle.
Determine if a BLF of the station lights
when a Normal CO call is ringing the
phone.
Determine if the station logged in via
AIC codes shows which queue the
call is coming from.
Determine if an extension name and
number are listed (1) or unlisted (0) in
the directory.
Cordless II:
and , then press TALK. The F1 LED flashes red.
#
Description/Comments Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
1 2 3
2 - 463