NEC Univerge SV8100 Features And Specifications Manual page 739

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
11-12-23
Service Code Setup (for Service
Access) – Meet-Me Answer in
Same Paging Group
15-07-01
Programmable Function Keys
20-06-01
Class of Service for Extensions
20-10-06
Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
31-02-01
Internal Paging Group
Assignment – Internal Paging
Group Number
31-02-02
Internal Paging Group
Assignment – Internal All Call
Paging Receiving
31-03-01
Internal Paging Group Settings –
Internal Paging Group Name
For additional programming information on Paging, refer to the
SV8100 Features and Specifications Manual
Description/Comments
Use to customize the Service
Codes used for meet-me answer
in same paging group service
access.
Assign function keys for External
Zone Paging (code 19 + zone),
External All Call Paging (code 20),
Internal Zone Paging (code 21 +
zone) or Meet Me Conference/
Paging Pickup (code 23).
Assign a Class of Service (1~15)
to an extension.
Turns Off (0) or On (1) an
extension to use Meet-Me
Conference and Paging.
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
Allow or prevent All Call Internal
Paging for each extension. If
allowed, extension can place and
receive All Call Internal Paging
announcements. If prevented,
extensions can only make (not
receive) All Call Internal Paging
announcements. If combined,
Paging zones should be restricted
as well, change the internal page
zone group in Program 31-07-01
to 0.
Assign name to Internal Paging
Groups (i.e., Page Zones). The
system shows the name you
program on the telephone display.
Paging, External
Assigned Data
MLT, SLT
(default = 763)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64
(0 = No Setting)
Default: 1
0 for IP Station
1 for TDM Station
0 = Off
1 = On
(default = 1)
Up to 12 characters
Refer to table in
Programming Manual.
and
Paging, Internal
features.
Issue 1.0
Level
1
2
3
2 - 715

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents