NEC Univerge SV8100 Features And Specifications Manual page 479

UNIVERGE SV8100
Program
Program Name
Number
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
SV8100 Features and Specifications Manual
Description/Comments
When an extension is set to ring mode
for ICM calls, enabling this option
prevents callers from changing the
call to voice announce mode.
Turns Off or On an extension user
ability to use Department Group Step
Calling.
Determine if the ISDN calling line
identity presentation and screening
indicators should be allowed.
Use to define the Class of Service
(COS) for call address information.
Turns Off or On a user Class of
Service from automatically blocking
outgoing Caller ID information when a
call is placed. If block is enabled, the
system automatically inserts the
Caller ID block code 1831 (defined in
Program 14-01-21) before the user
dialed digits (this requires Program
14-02-10 to be enabled). If block is
disabled, the system outdials the call
just as it was dialed by the user.
Turns Off or On an extension ability to
display the name and number of the
extension that dialed 911 (US Only).
Turns Off or On an extension ability to
override the trunk access map
programming for outgoing calls.
Use to define the Class of Service
(COS) for voice over to busy virtual
extension.
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 1.0
Level
1 2 3
2 - 455