NEC Univerge SV8100 Features And Specifications Manual page 1061

UNIVERGE SV8100
Program
Program Name
Number
51-15-01 Demonstration Setting
51-16-01 Net-Link System Data Replication
Mode Setting – System Data
Replication Mode
51-16-02 Net-Link System Data Replication
Mode Setting – System Data
Replication Time Setting
51-16-03 Net-Link System Data Replication
Mode Setting – System Data
Replication Interval Setting
51-16-04 Net-Link System Data Replication
Mode Setting – Replication Time
Stamp
51-16-05 Net-Link System Data Replication
Mode Setting – System Data
Replication Wait Time
51-16-06 Net-Link System Data Replication
Mode Setting – System Data
Replication Interval
84-26-01 IPL Basic Setup – IP Address
84-26-02 IPL Basic Setup – RTP Port
Number
SV8100 Features and Specifications Manual
Description/Comments
Used to automatically set the
minimum setting values in NetLink.
A system reset occurs after this
command is executed.
(This program is available only
via telephone programming
and not through PC
Programming).
Sets the synchronous mode of the
system data. When set to 1 (Setting
Time Mode), the systems are
synchronized at the time set in Item
02 below.
When set to 2 (Interval Mode), the
systems are synchronized at regular
time intervals set in Item 03 below.
Sets the time of day that both
systems synchronize database
(when Item 01 is set to 1).
Sets the time interval that both
systems synchronize database
(when Item 01 is set to 2).
Show next replication time.
This sets the wait time until
replication starts when Net-Link is
created.
This program sets an interval time to
start replication to the next node
after replication to one node is
completed.
Assign the IP address for each DSP
on the IPLA.
Assign the RTCP port number used
for each DSP on the IPLA.
Assigned Data
1 = Primary automatic
setting
2 = Secondary 1 -
automatic operation
setting
3 = Secondary 2 -
automatic operation
setting
4 = Secondary 3 -
automatic operation
setting
0 = Disable
1 = Setting Time Mode
2 = Interval Mode
(default = 2)
0000~2359
(default = 0000)
15~1440 (minutes)
(default = 30 minutes)
(default not assigned)
1~86400 (seconds)
(default = 180 seconds)
0~86400 (seconds)
(default = 1 second)
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:
Slot 4 = 172.16.0.44
0~65534
Defaults:
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084
VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
Issue 1.0
Level
1 2 3
2 - 1037