NEC Univerge SV8100 Features And Specifications Manual page 1077

UNIVERGE SV8100
Program
Program Name
Number
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
20-09-01 Class of Service Options
(Incoming Call Service) – Second
Call for DID/DISA/DIL/E&M
Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-09-08 Class of Service Options
(Incoming Call Service) – Calling
Party Information
20-10-01 Class of Service Options
(Answer Service) – Group Call
Pickup (Within Group)
SV8100 Features and Specifications Manual
Description/Comments
Use to define the Class of Service
(COS) for voice over to busy virtual
extension.
Turns Off (0) or On (1) the extension
ability to receive a second call from
a DID, DISA, DIL, or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
Turns Off (0) or On (1) the Caller ID
display at an extension.
Define whether an extension
displays the Caller Sub-Address.
Determine whether or not the
CHECK LIST message is displayed
to indicate a missed call.
Turns Off or On an extension ability
to enable Handsfree Answerback or
Forced Intercom Ringing for their
incoming Intercom calls.
If this option is set to 1, the Incoming
Call Time is displayed on the
multiline terminal LCD while the
telephone is ringing.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Must be set to 1 to enable
automatic Off-Hook Signaling.
Turns Off or On and extension ability
to display calling party information
on CCIS calls.
Turns Off or On Group Call Pickup
for calls ringing an extension Pickup
Group as well as ring group calls
#
(Service Code ).
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
01~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 1.0
Level
2 3
2 - 1053