NEC Univerge SV8100 Features And Specifications Manual page 1313

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-10-20 Service Code Setup (for System
Administrator) – VRS - Record/
Erase Message
11-10-21 Service Code Setup (for System
Administrator) – VRS - General
Message Playback
11-10-22 Service Code Setup (for System
Administrator) – VRS - Record or
Erase General Message
11-12-54 Service Code Setup (for Service
Access) – VRS Routing for ANI/
DNIS
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-07-13 Class of Service Options
(Administrator Level) – VRS
Record (VRS Msg Operation)
SV8100 Features and Specifications Manual
Description/Comments
Define the service code to use to
record or erase a VRS message.
Define the service code to use to
playback the general message.
Define the service code to use to
record or erase a general message
on the VRS.
Define the service code to use
when setting up ANI/DNIS Routing
to the VRS Automated Attendant.
Using the Transfer feature, this also
allows a call to be transferred to the
VRS (default: 782).
For the VRS Waiting Message
feature, assign the VRS Incoming
Call Queuing Setup key (code 52 +
#
ring group ) to manually enable
the feature.
Assign a Class of Service (1~15) to
extensions.
Turns Off (0) or On (1) an extension
ability to record, erase and listen to
VRS messages.
Assigned Data
MLT, SLT
(default = 616)
MLT, SLT
(default = 611)
MLT, SLT
(default = 612)
(default = 782
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
Issue 1.0
Level
1 2 3
2 - 1289