NEC Univerge SV8100 Features And Specifications Manual page 762

Issue 1.0
Message Waiting
Headset Mode for SLT
Flexible Transfer/Virtual Loop Back
Tandem Ringing
Park over CCIS
Virtual extension key as Call Coverage Key for mobile extension
Automatic Conversation Record for trunks
Conditions
It is recommended that this feature uses ISDN platform (as these trunks provide answer
supervision).
The analog line must provide CLI information to allow the Mobile Extension to dial into the
system to access features.
For the extension DTMF, the minimum Detect Level for the DTMF Tone (Program 80-03-03)
must be set to allow a minimum detection level of -25dBm. This entry is dependent on the
Detect Level selected in Program 80-03-01.
The Mobile Extension uses the * to perform a flash, so any service codes which begin
with * must be changed (Programs 11-10, 11-11, 11-12, 11-13).
To provide a proper disconnect, Disconnect Supervision is required for the trunks
used for this feature.
When an entry is made in Program 15-22-01 for a Mobile Extension, ports are reserved for
Mobile Extension usage in groups of 4.
To keep consecutive port numbering for blades, you may wish to consider starting Mobile
Extensions at the upper extension port range.
Default Setting
No Mobile Extensions are configured.
System Availability
Terminals
Any Multiline Terminal
Required Component(s)
None
2 - 738
UNIVERGE SV8100
Mobile Extension