NEC Univerge SV8100 Features And Specifications Manual page 1368

Issue 1.0
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
For this feature...
Meet Me
Conference
(Also see
Conference)
Memo Dial
Message Waiting
Microphone Cutoff
Call Arrival (CAR)
Keys
Name Storing
Networking
Night Service
Off-Hook Signaling
Paging, External
3 - 28
press the key and enter the code (e.g., 48 for Voice Over).
Use this key...
Code: 32
Operation: Press key
Code: 31
Operation:
Store: While on call,
press key + number to
store
Use: Press Key + Call
or line
Erase: Speaker key +
Press key
Code: 38
Operation: Leave
message: Call ext +
Press key OR Answer
message: Press key
Code: 02
Operation: Set up call
+ Press key
Code: 03 + ext. or
dept group
Operation: Press key
Code: 55
Operation: Press key
+ ext ## + name + Hold
Code: 06 + network
(01~50)
Operation: Press key
Code: 09 + mode (1~4
or 1~8)
Operation: Press key
Code: 33
Operation: Call ext.
and receive busy +
Press key
Code: 19 + zone (1~8)
Operation: Press Key
Code: 20
Operation: Press key
When your are...
Joining a Meet Me
Conference
Storing, using or checking
a Memo dial number
Answering/Leaving a
Message Waiting
Using Microphone Cutoff
Placing or answering a
call to your virtual
(phantom)
extension
Entering a name for the
extension to be displayed
on telephones
Accessing a networked
trunk
Activating the Day/Night
Mode
Signaling a busy
extension
Making an external zone
page
Making an external All Call
page
UNIVERGE SV8100
Also See
Key Lamp Status
Srvc Code
None 763 or 764
None
None
On red when
activated
Slow Flash red
when ringing, On
red when busy
None
None
On red when
activated
None
On red when 703 + zone
activated
On red when 703 + 0
activated
Codes Tables
-
0
-
-
700
-
718 +
+ 0
7