NEC Univerge SV8100 Features And Specifications Manual page 452

Issue 1.0
Program
Program Name
Number
15-02-38 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Cycle
15-08 Incoming Virtual Extension Ring
Tone Setup
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
20-15-01 Ring Cycle Setup – Normal
Incoming Call on Trunk
20-15-02 Ring Cycle Setup – PBX, CES
Incoming Call
20-15-03 Ring Cycle Setup – Incoming
Internal Call
20-15-04 Ring Cycle Setup – DID/DISA/
VRS
20-15-05 Ring Cycle Setup – DID/DDI
20-15-06 Ring Cycle Setup – Dial-In in the
E&M Tie Line
20-15-07 Ring Cycle Setup – Door Box
Ringing for SLT
20-15-08 Ring Cycle Setup – Virtual
Extension Ring
2 - 428
Description/Comments
Select the cycle method that the
Large LED flashes when the
extension has a VM Message
Waiting set to the extension.
Use to assign a ring tone range
(0~4) to incoming virtual extensions
assigned to a Virtual Extension key
(Program 15-07).
When two or more virtual
extensions are set on a function key
on the telephone, and the tone
pattern by which the sound of each
extension differs, the priority of ring
sound is set up.
Determine if a BLF of the station will
light when a Normal CO call is
ringing the phone.
Used to define the ringing cycle for
Normal Incoming Trunk calls.
Used to define the ringing cycle for
PBX, CES incoming calls.
Used to define the ringing cycle for
incoming Internal Calls.
Used to define the ringing cycle for
DID/DISA/VRS Calls.
Used to define the ringing cycle for
DID/DDI calls.
Used to define the ringing cycle for
Dial-In and E&M Tie Line calls.
Used to define the ringing cycle for
Door Box ringing for SLT.
Used to define the ringing cycle for
Virtual Extension Ringing.
Distinctive Ringing, Tones and Flash Patterns
UNIVERGE SV8100
Assigned Data
1
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
(default = 0)
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
Order 1 Pattern 0 =
Pattern 1 (default)
Order 2 Pattern 1 =
Pattern 2 (default)
Order 3 Pattern 2 =
Pattern 3 (default)
Order 4 Pattern 3 =
Pattern 4 (default)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Ringing Cycle = 1~13
(default = 3)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 3)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 12)
Ringing Cycle = 1~13
(default = 8)
Ringing Cycle = 1~13
(default = 8)
Level
2 3