NEC Univerge SV8100 Features And Specifications Manual page 426

Issue 1.0
Program
Program Name
Number
25-06-02 VRS/DISA One-Digit Code
Attendant Setup – Destination
Number
25-07-01 System Timers for VRS/DISA –
VRS/DISA Dial Tone Time
25-07-02 System Timers for VRS/DISA –
VRS/DISA No Answer Time
25-07-03 System Timers for VRS/DISA –
Disconnect after VRS/DISA
retransfer to IRG
25-07-04 System Timers for VRS/DISA –
Calling Time to Automatic
Answering Telephone Set
25-07-05 System Timers for VRS/DISA –
Duration Time for Guidance
Message by Automatic
Answering Telephone Set
25-07-06 System Timers for VRS/DISA –
Duration Time for Guidance
Message by ACI
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
2 - 402
Description/Comments
Set up single digit dialing for
Automated Attendant callers. For
each VRS Message programmed to
answer outside calls, specify:
The digit the Automated Attendant
caller dials (1~12, where 10 = 0,
#
11 = and 12 = ). (Keep in mind
that if you assign destinations to
digits three and four, outside
callers cannot dial system
extensions that begin with that
digit.)
The destination reached (four
digits maximum) when the caller
dials the single digit code.
After answering the DISA trunk, the
system waits this time for the caller to
dial the first digit of the DISA
password. If the caller fails to dial
during this time, the system drops the
call.
A DISA caller can ring an extension
for this time before the system sets
the call as a Ring No Answer. After
this time expires, the call follows the
programmed Ring No Answer
routing. (Set to Program 25-03 and
25-04.)
From DISA trunk, when the call may
go to Incoming Ring Group of PRG
25-03/25-04. This setting determines
how long the call is ringing in the IRG.
Set the answering waiting time of the
automatic answering extension when
an incoming DID trunk call is
received.
Set the announcement time of the
automatic answering extension
before an incoming DID trunk caller is
disconnected.
Set the announcement time by the
ACI after which an incoming DID
trunk caller is disconnected.
Determine the time a DISA caller or
any automatically transferred trunk-
to-trunk (such as Tandem Trunking)
conversation can talk before the
Long Conversation tone is heard.
UNIVERGE SV8100
Assigned Data
Up to eight digits
(default not assigned)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 0 seconds)
0~64800 (seconds)
(default = 60 seconds)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 1800
seconds)
Direct Inward System Access (DISA)
Level
1 2 3