NEC Univerge SV8100 Features And Specifications Manual page 1249

UNIVERGE SV8100
Assign Trunks As Automated Attendant Trunks – Method 2
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
For Either Method:
Program
Program Name
Number
22-04-01 Incoming Extension Ring Group
Assignment
22-08-01 DIL/IRG No Answer Destination
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
SV8100 Features and Specifications Manual
Description/Comments
Assign Service Type 0 to each
trunk you want to ring into Voice
Mail as a normal line.
Assign Ring Group 102 for an
In-Skin/External Voice Mail, or 103
for a Central Voice Mail as the
destination.
Description/Comments
To enable Voice Mail Overflow,
assign selected extensions to a Ring
Group that will ring for unanswered
DILs to Voice Mail ports. In Program
22-06, enter 1 to enable overflow
ringing.
For Voice Mail Overflow, enter the
Ring Group that unanswered DILs to
Voice Mail will ring after the DIL Call
Waiting time (Program 22-01-04).
Set the interval a transferred call
waits at a forwarded extension
before routing to the called
extension mailbox.
Assigned Data
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
Assigned Data
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring for
incoming Ring Group 1
calls. No other
extensions ring for
incoming Ring Group 1
calls.
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
0~64800 (seconds)
(default = 10)
Issue 1.0
Level
1 2 3
Level
1 2 3
2 - 1225