NEC Univerge SV8100 Features And Specifications Manual page 1262

Issue 1.0
Program
Program Name
Number
47-07-02 VM8000 InMail Routing Mailbox
Options – Routing Mailbox Type
47-08-01 Call Routing Mailbox Options –
Dial Action Table
47-08-02 Call Routing Mailbox Options –
Screened Transfer Timeout
47-08-03 Call Routing Mailbox Options –
Time Limit for Dialing Commands
47-08-04 Call Routing Mailbox Options –
Fax Detection
2 - 1238
Description/Comments
Use this option to set the Routing
Mailbox type.
Use this option to assign the Dial
Action Table to the Call Routing
Mailbox. The Dial Action Table
defines the dialing options for the
call Routing Mailbox.
Use this option to set how long a
Screened Transfer (TRF) from the
Automated Attendant rings an
unanswered extension before
recalling.
This option has a similar function as
Customize: Mailbox Options: Call
Routing: [Call Handling] Options:
Delay Rings Before Redirect
Transfer in VM8000 InMail.
This option determines how long
VM8000 InMail waits for an
Automated Attendant caller to dial
before routing the call to the Timeout
destination. Be sure your Dial Action
Tables have a Timeout action
programmed.
If the caller waits too long to dial:
When the associated Dial Action
Table has a Timeout action
programmed, the caller routes to
that destination.
When the associated Dial Action
Table does not have a Timeout
action programmed, the Instruction
Menu repeats three times and then
VM8000 InMail hangs up.
Use this option to enable Fax
detection for the Call Routing
Mailbox. When enabled, the
VM8000 InMail Automated
Attendant (when using this mailbox)
detects incoming Fax CNG tone.
The Fax then routes to the company
Fax Machine according to the setting
in PRG 47-01-06: Fax Extension.
When disabled, the Automated
Attendant does not detect incoming
Fax calls.
UNIVERGE SV8100
Assigned Data
0 = None
1 (Call Routing)
2 (Announcement)
3 (Directory)
4 (Distribution)
Default:
Mailboxes 01~08 = 1
(Call Routing)
Mailboxes 09~32 = 2
(Announcement)
1~16
(Dial Action Table 1~16)
Default:
1 (Dial Action Table 1)
0~255 (seconds)
Entering 0 causes
immediate recall.
(default = 15)
0~99 (seconds)
Entering 0 causes the
Automated Attendant to
immediately route callers
to the Timeout
destination programmed
in the active Dial Action
Table.
(default = 5)
0 = Disabled
1 = Enabled
(default = 0)
VM8000 InMail
Level
1 2 3