NEC Univerge SV8100 Features And Specifications Manual page 1295

UNIVERGE SV8100
Operation
Calling your Mailbox
To call your mailbox:
Multiline Terminal
1. Press your Voice Mail key (Program 15-07 or SC 751: 77) or the Message key.
- OR -
Press Speaker and dial the Voice Mail Master Number. After Voice Mail Answers, dial your mailbox
number.
Your mailbox number is normally the same as your extension number. You may optionally dial a co-worker's
mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
- OR -
Press Speaker and dial 8.
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.
Normally, your Message Waiting LED goes out (if applicable). If it continues to flash, you have unanswered
Message Waiting requests or a new General Message. Refer to
Single Line Telephone
1. Lift the handset and dial 8.
If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox number
instead. You can also use this procedure from your own telephone to call a co-worker's mailbox.
2. If requested by Voice Mail, enter your security code.
Checking Messages
1. Press the Message key once.
The voice mail is called.
When there are new messages, the Large LED on the telephone flashes as red.
With this option set, the MSG key can be used as a Voice Mail key for any function [calling voice mail or transfer
call a to voice mail (Hold + MSG + Extension Number), etc.].
SV8100 Features and Specifications Manual
Checking Messages on page
Issue 1.0
2-1247.
2 - 1271