NEC Univerge SV8100 Features And Specifications Manual page 1248

Issue 1.0
Program
Program Name
Number
24-02-02 System Options for Transfer –
MOH or Ringback on Transferred
Calls
Assign Trunks As Automated Attendant Trunks – Method 1
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
2 - 1224
Description/Comments
Use this option to enable (0) or
disable (1) MOH on Transfer. If
enabled (0), a transferred caller
hears Music on Hold while their call
rings the destination extension. If
disabled (1), a transferred caller
hears ringback while their call rings
the destination extension. For this
option to work with voice mail, the
transferred call must be an
unscreened transfer.
Description/Comments
Assign Service Type 4 to each
trunk you want to ring into Voice
Mail as a Direct Inward Line (DIL).
Assign the master/pilot number of
the voice mail group from Program
11-07-01 as the DIL destination. If
all Voice Mail ports are in the same
unique Extension (Department)
Group (see Program 16-02 above),
the DIL rings another Voice Mail
port if its assigned port is busy.
UNIVERGE SV8100
Assigned Data
0 = Hold Tone
1 = Ring Back
Tone
(default = 0)
Assigned Data
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)
VM8000 InMail
Level
1 2 3
Level
1 2 3