NEC Univerge SV8100 Features And Specifications Manual page 892

Issue 1.0
Related Features
Central Office Calls, Placing
Multiple Trunk Types
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
14-02-01 Analog Trunk Data setup –
Signaling Type (DP/DTMF)
14-02-07 Analog Trunk Data Setup – DP to
DTMF Conversion Options
Operation
To convert your telephone dialing to tone after placing your call on a pulse line:
1. Place a call over pulse line.
2. Dial to switch the DP trunk to DTMF dialing.
#
2 - 868
Description/Comments
At default, Program 14-02-01 is set
to 2 (DTMF).
For each trunk, set the type of DP
to DTMF Conversion required:
automatic (0), automatic and
manual (1), or manual (2).
UNIVERGE SV8100
Assigned Data
0=Dial Pulse (10 PPS)
1=Dial Pulse (20 PPS)
2=DTMF
(default = 2)
0 = Automatic
1 = Automatic and
Manual
2 = Manual
(default = 2)
Pulse to Tone Conversion
Level
1 2 3