Sv8100 Poe Gigabit Switch - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
The NEC PoE Gigabit Switch card (GSWU) is a fully managed switch which brings gigabit speeds to
users while adding a whole new level of intelligence and security to networks.
The eight 10/100/1000 Mbps ports enable users to take advantage of the Gigabit Ethernet interfaces. The
NEC PoE Gigabit Switch Card supporting the Univerge SV8100 and SV8300 system.
All user ports can support up to Gigabit Ethernet and may also support the primary Layer 2 protocols,
with an emphasis on QoS features such as 802.1p and Diffserv.
The CD-ETIA blade has 8 RJ45 ports for 10BASE-T, 100BASE-T and 1000BaseT along the front. The
CD-ETIA design is based on one card and one software build. However, all the cards in the system will be
managed as a Master/Slave configuration. The Master will provide full distributed Layer 2 management to
all Ethernet Switch cards in the system.
The CD-ETIA card will have the ability to be a standalone card providing 8 Gigabit Ethernet PoE ports.
However, the real advantage with this card is that additional cards can be "stacked" by external "daisy
chain" connections to provide up to 76 contiguous ports (all on the same managed domain/network).
Below are the primary features of the card set.
Switches, unlike hubs, use microsegmentation to create collision domains, one per connected segment.
This way, only the Ethernet devices which are directly connected via a point-to-point link, or directly
connected hubs are contending for the medium. By eliminating collisions, full-duplex point-to-point
connections on the switch are possible.
When multiple blades requiring Ethernet data connections are installed in an UNIVERGE SV8100
chassis, the CD-ETIA can provide a neat and simple installation.
The CD-ETIA is an in-skin, fast Ethernet switching hub unit that provides the following services:
Eight 10/100/1000 Gigabit Ethernet ports.
PoE
802.3af compliant, supplies up to IEEE standard maximum 15.4W on eight 10/100/1000 ports Link/
ACT, POE System.
Simplified QoS management using 802.1p, Diffserv or ToS traffic prioritization specifications.
Granular security and QoS implementation.
802.1Q based VLANs enable segmentation of networks for improved performance and security.
VLAN
Port Based and 802.1Q Tag-based VLANS Management VLAN.
Automatic configuration of VLANs across multiple switches through GVRP/ GARP.
Auto MDI/MDIX.
Port Mirroring.
SV8100 Features and Specifications Manual

SV8100 PoE Gigabit Switch

Issue 1.0
2 - 1039