NEC Univerge SV8100 Features And Specifications Manual page 466

Issue 1.0
Program
Program Name
Number
32-01-03 Door Box Timers – Off-Premise
Call Forward by Door Box
Disconnect Timer
32-02-01 Door Box Ring Assignments
32-03-01 Door Box Basic Setup – Chime
Pattern
32-03-02 Door Box Basic Setup – CODEC
Transmit Gain Setup
32-03-03 Door Box Basic Setup – CODEC
Receive Gain Setup
32-04-01 Doorphone Name Setup
Operation
To call a Door Box:
Multiline Terminal
1. Press Speaker
2. Dial 702.
3. Dial Door Box Number (1~8).
2 - 442
Description/Comments
Define the conversation period for
an Off-Premise Call Forward by
Door Box call. When this timer
expires, the caller hears busy tone
for 3 seconds (fixed time), and the
call is then disconnected.
Determine which Door Boxes
should ring which extensions by
entering the extension number.
Each Door Box can be programmed
to ring up to 32 extensions and an
extension can be programmed to
ring for multiple Door Boxes.
Set the chime pattern (0~6) for
each Door Box.
Set the Transmit Gain for each
Door Box.
Set the Receive Gain for each Door
Box.
This command defines the name of
each Doorphone
UNIVERGE SV8100
Assigned Data
1
0~64800 (seconds)
(default = 60 seconds)
Maximum eight digits
(default not assigned)
0 = None
1 = Door Box Ring 1
2 = Door Box Ring 2
3 = Door Box Ring 3
4 = Door Box Ring 4
5 = Door Box Ring 5
6 = Door Box Ring 6
default:
Door Box 1 = 1
Door Box 2 = 2
Door Box 3 = 3
Door Box 4 = 4
Door Box 5 = 5
Door Box 6 = 6
Door Box 7 = 1
Door Box 8 = 1
1~63 (-15.5dB ~
+15.5dB)
(default = 32)
1~63 (-15.5dB ~
+15.5dB)
(default = 32)
Up to 12 characters
(default not assigned)
Level
2 3
Door Box