NEC Univerge SV8100 Features And Specifications Manual page 859

UNIVERGE SV8100
Only one PCPro/WebPro/Handset can be programming the switch at any one time.
When programming via WebPro/PCPro, some data requires you to logout before the switch
fully applies the changes. These Programs are: 10-21-2, 11-02 (for directory dial), 11-04 (for
directory dial), 13-04 (for directory dial), 14-04, 15-05, 15-15, 16-02, 23-02, 31-02, 41-02,
41-17, 47-02, 47-03, 82-11 and 83-11.
In the card configuration window, if you click a card type in the main menu, the menu will
close. You must mouse over the card type to open the submenu to list all cards of that card
type.
To access the modem over K-CCIS, route the modem access service code to the target
switch. Do not call a station that is call forwarded to the service code. When accessing the
modem over K-CCIS, enter the service code to be dialed in PC Pro.
PC Pro follows the PC dialing properties. If dialing a service code, you must turn off the dial 9 for
outside line and area code inclusion or PC Pro will dial these digits as well.
Some program items require second initialization of the KTS before they take effect. These
Programs are: 10-12-01, 10-12-02, 10-12-03, 10-12-04, 10-13-01, 10-13-02, 10-13-03,
10-14, 10-15, 10-16-01, 10-16-02, 10-16-03, 10-16-04, 20-01-03, 47-01-01, 80-01,
80-02-01, 80-02-02, 80-02-03, 80-02-04, 80-03, 80-04, 84-03-01, 84-03-02, 84-03-06,
84-03-07, 84-03-08, 84-05-01, 84-05-02, 84-06-01, 84-06-02, 84-06-03, 84-06-04,
84-06-05, 84-06-06, 84-06-07, 84-06-08, 84-06-09, 84-06-10, 84-06-11, 84-09 and 84-10.
Default Setting
None
System Availability
Terminals
Not Applicable
Required Component(s)
Each copy of installed PC Programming requires a license.
Related Features
None
SV8100 Features and Specifications Manual
Issue 1.0
2 - 835