NEC Univerge SV8100 Features And Specifications Manual page 598

Issue 1.0
Program
Program Name
Number
14-07-01 Trunk Access Map Setup
15-02-06 Multiline Telephone Basic
Data Setup – Hold Key
Operating Mode
15-02-07 Multiline Telephone Basic
Data Setup – Automatic Hold
for CO Lines
15-02-11 Multiline Telephone Basic
Data Setup – Callback
Automatic Answer
15-06-01 Trunk Access Map for
Extensions
15-07-01 Programmable Function Keys
2 - 574
Description/Comments
Set up the Trunk Access Maps.
This sets the access options for
trunks.
Use this option to set the function of
the Multiline Hold key. The Hold key
can activate normal Hold or
Exclusive Hold.
Determines whether an extension
will disconnect the trunk line (1) or
automatically hold it (0) when you
direct select a CO line without
placing the call on hold first.
Automatic Hold does not work until
the elapse call timer is displayed.
Enable (1) or disable (0) Callback
Automatic Answer.
Assign Trunk Access Maps to
extensions.
Assign a function key for Exclusive
Hold (code 45). If an extension has
its fixed Hold key reassigned (in
Program 15-02-06), assign a
function key for System Hold (code
44).
UNIVERGE SV8100
Assigned Data
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when
trunk on Hold
4 = Outgoing access and
access when trunk on
Hold
5 = Incoming access and
access when trunk on
Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk on
Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is on
Hold).
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)
0 = Hold
1 = Disconnect (Cut)
(default = 1)
0 = Off
1 = On
(default = 1)
Trunks 1~200
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Level
1 2 3
Hold