NEC Univerge SV8100 Features And Specifications Manual page 861

UNIVERGE SV8100
Program
Program Name
Number
11-15-14 Service Code Setup,
Administrative (for Special
Access) – Modem Access
22-02-01 Incoming Call Trunk Setup
22-07-01 DIL Assignment
90-02-01 Programming Password Setup –
User Name
90-02-02 Programming Password Setup –
Password
SV8100 Features and Specifications Manual
Description/Comments
Assign the service code to be used
to access the internal modem on the
CD-CP00-AU.
Define the service type for the trunk
intended to access the internal
modem as 4:DIL.
Assign the Modem Access service
code set in Program 11-15-14 as
the destination extension for the DIL
trunk for modem access.
Use to set the system passwords.
Configure the administrator
accounts that are used when
connecting to the KTS via PCPro/
WebPro.
If using PCPro, these are the
accounts that are used to connect.
If using WebPro, these are the
accounts that are used to login.
If calls are answered by an
Auto attendant first, instead of
the DIL setup on Program
22-01 and PRG 22-07, set the
transfer destination in the Auto
Attendant to the Modem
Access Service Code.
Assigned Data
(default = 740)
0 = Normal
1 = VRS (second dial
tone if no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Extension Number
(maximum eight digits)
(default not assigned)
Maximum 10 characters
User No. 1, Level 1 (MF)
User Name = nec-i,
Password = 374772
User No. 2, Level 2 (IN)
User Name = tech,
Password = 12345678
User No. 3, Level 3 (SA)
User Name = admin1,
Password = 0000
User No. 4, Level 4 (SB)
User Name = admin2,
Password = 9999
Up to eight digits.
Refer to the SV8100
Programming Manual for
default settings.
Issue 1.0
Level
1 2 3
2 - 837