NEC Univerge SV8100 Features And Specifications Manual page 877

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
14-01-09 Basic Trunk Data Setup – Private
Line
14-07-01 Trunk Access Map Setup – Trunk
Port Number
15-06-01 Trunk Access Map for Extensions Assign extension to have Private
SV8100 Features and Specifications Manual
Description/Comments
Determine if a trunk should be used
as a normal (0) or private (1) line.
A Private Line reserves a
trunk for a multiline terminal
for placing and answering
calls. A user with a Private
Line always knows when
important calls are for them.
Additionally, the user has their
own trunk for placing calls that
is not available to others in the
system.
Assign Private Line to the Private
Line Access Map (refer to Program
15-06 in this section). Use option 5
for Incoming, option 7 for Both
Ways and option 4 for Outgoing. In
all other Access Maps, assign
option 3 to the Private Line.
Line to an unused Private Line
Access Map.
Assigned Data
0 = Disable Private Line
(Normal)
1 = Enable Private Line
(Private Line)
(default = 0)
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when
trunk on Hold
4 = Outgoing access and
access when trunk on
Hold
5 = Incoming access and
access when trunk on
Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk on
Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is on
Hold).
Trunks 1~200
(default = 1)
Issue 1.0
Level
1 2 3
2 - 853