NEC Univerge SV8100 Features And Specifications Manual page 996

Issue 1.0
To store a Station Speed Dialing number (Single Line Telephones only):
1. Lift the Handset.
2. Dial 755.
3. Dial the Station Speed Dial buffer number to be programmed (0~9).
1 = Station Speed Dial Buffer 1
2 = Station Speed Dial Buffer 2
3 = Station Speed Dial Buffer 3
4 = Station Speed Dial Buffer 4
5 = Station Speed Dial Buffer 5
6 = Station Speed Dial Buffer 6
7 = Station Speed Dial Buffer 7
8 = Station Speed Dial Buffer 8
9 = Station Speed Dial Buffer 9
0 = Station Speed Dial Buffer 10
4. Dial the telephone number you want to store (up to 24 digits).
Valid entries are 0~9, # and .
A Single line set cannot program a pause or flash in a spd bin.
5. Hang up.
To dial a Station Speed Dialing number (Multiline Terminal):
1. Press Speaker.
2. Dial 7 (default Service Code).
#
- OR -
Press the System Speed Dialing key (Service Code 751: 27).
To preselect, press a line key in step 1 (instead of Speaker).
3. Dial the Station Speed Dial buffer number (0 ~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
: : :
0 = Station Speed Dial buffer 10
The stored number dials out.
Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may optionally select a
specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
2 - 972
: : : :
UNIVERGE SV8100
Speed Dial – System/Group/Station