NEC Univerge SV8100 Features And Specifications Manual page 1250

Issue 1.0
Program
Program Name
Number
45-01-01 Voice Mail Integration Options –
Voice Mail Department Group
Number
45-01-02 Voice Mail Integration Options –
Voice Mail Master Name
45-01-04 Voice Mail Integration Options –
Park and Page
45-01-05 Voice Mail Integration Options –
Message Wait
45-01-06 Voice Mail Integration Options –
Record Alert Tone Interval Time
45-01-14 Voice Mail Integration Options –
CCIS Centralized Voice Mail
Number
45-01-15 Voice Mail Integration Options –
Analog Voice Mail Protocol
Selection
45-01-16 Voice Mail Integration Options –
Voice Mail Fax Digit Add
Assignment
45-01-17 Voice Mail Integration Options –
Reply Mailbox Number
45-01-18 Voice Mail Integration Options –
Trunk Number Mapping
2 - 1226
Description/Comments
Assign which Extension
(Department) Group number is to be
assigned as the voice mail group. An
entry of '0' means there is no voice
mail installed.
Enter the Voice Mail master name
up to 12 characters.
Enable (1) or disable (0) the system
ability to process the Voice Mail Park
and Page ( ) commands. You
should normally enable this option.
Enable (1) or disable (0) the system
ability to process the Voice Mail
#
Message Wait ( ) commands. You
should normally enable this option. If
enabled, be sure that the
programmed Message Notification
strings do not contain the code
for trunk access. When using an
external voice mail and centrex
transfer, this option should be
disabled or the service code
Program 11-12-42 will need to be
changed.
This sets the time (0~64800
seconds) between Voice Mail
Conversation Record alerts.
Assign the pilot number to
Centralized Voice Mail over K-CCIS
link. This is only assigned in the
remote switches. If using this,
Program 45-01-01 should be set to
0.
Assigns whether fixed codes are
used or the codes used in PRG
45-04 are used for analog voice mail
protocol.
Assign up to four digits in front of the
station number sent to the SLT port
when a call is forwarded.
Whether or not to include the
mailbox number in the analog voice
mail protocol.
Assign the digits of trunk number
mapping.
UNIVERGE SV8100
Assigned Data
Department Groups:
0~64
0 = No Voice Mail
(default = 0)
Up to 12 Characters
(default = Voice Mail)
0 = Off
1 = On
(default = 1)
0 = Off
1 = On
(default = 1)
#
9
#
3 in
0~64800 (seconds)
(default = 30)
Dial (up to eight digits)
(default not assigned)
0: Fixed
1: Program
(default = 0)
Up to four digits
(default = 0)
0 = No
1 = Yes
(default = 1)
2~3
(default = 2)
Level
1 2 3
VM8000 InMail