NEC Univerge SV8100 Features And Specifications Manual page 1376

Issue 1.0
To program a key, press Speaker, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
Use this key...
Code: 02 + TRK
group (1~9 or
001~200)
Operation: Press
key
Code: 03 + ext. or
department group
Operation: Press
key
Code: 04 + orbit
(01~64)
Operation: Place or
answer call + Press
key
Code: 06 +
Network number
(1~50)
Operation: Press
key
3 - 36
press the key and enter the code (e.g., 48 for Voice Over).
For this feature...
Trunk Groups
Call Arrival (CAR) Keys
Park
Networking
When you are...
Using a trunk group key to
access a Trunk Group
Call Arrival (CAR) Key
Placing or answering a
call from your virtual
(phantom) extension or
Call Arrival (CAR) Key
Placing or answering a
call to your co-worker's
extension
Placing a call into or
retrieving a call from a
Park Orbit
Accessing a networked
trunk
UNIVERGE SV8100
Key Lamp Status
On red when
active
:
Slow Flash red
when ringing, On
red when busy
:
Fast Flash when
orbit is busy
(green at
originator, red at
others)
None
Also see
Srvc Code
704
-
#6 (Park)
6 (pickup)
-
Codes Tables