NEC Univerge SV8100 Features And Specifications Manual page 912

Issue 1.0
Related Features
Automatic Call Distribution (ACD)
Automatic Route Selection
Direct Inward Line (DIL)
Direct Inward Dialing (DID)
Direct Inward System Access (DISA)
ISDN Compatibility
Night Service
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-13-49 Class of Service Options
(Supplementary Service) – BLF
Indication on CO Incoming State
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
2 - 888
Description/Comments
Assign function keys as line (code
01 + trunk number) or Call
Appearance (CAP) Keys [code 08
+ CAP Key orbit 0001~9999 (or
0000 for auto assign)].
Turns On (1) or Off (0) BLF
Indication on CO Incoming State.
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
UNIVERGE SV8100
Assigned Data
Trunks: 1~200
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
1 = On
0 = Off
(default = 0 for COS
01~15)
0~64800 (seconds)
(default = 0 seconds)
Ring Groups
Level
1 2 3