NEC Univerge SV8100 Features And Specifications Manual page 424

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 1.0
Program
Program Name
Number
22-02-01
Incoming Call Trunk Setup
22-04-01
Incoming Extension Ring Group
Assignment
25-01-01
VRS/DISA Line Basic Data Setup
– VRS/DISA Dial-In Mode
25-01-02
VRS/DISA Line Basic Data Setup
– DISA User ID
25-01-03
VRS/DISA Line Basic Data Setup
– VRS/DISA Transfer Alarm
25-02-01
VRS/DISA VRS Message
25-03-01
VRS/DISA Transfer Ring Group
With Incorrect Dialing
2 - 400
Description/Comments
For DISA operation, set the trunk
service type to 2. You can have a
different service type for each Night
Service mode.
Assign the extensions that should
receive the overflow. Set the ringing
in Program 22-06.
Select whether the DISA trunk uses
Extension number/Service code
specify (0) or Dial Conversion Table
(1).
Select whether or not the DISA User
IDshould be used.
Select whether the DISA transfer
alarm should be used.
Assign the source and VRS message
number to be used as the Automated
Attendant Message for each trunk
(001~200) which is assigned as a
VRS/DISA.
Set the operating mode of each DISA
trunk. This sets what happens to the
call when the DISA caller dials
incorrectly. The call can either
disconnect (0), transfer to an
alternate ring group destination, or
transfer to In-Skin/External Voice
Mail, or Centralized Voice Mail.
UNIVERGE SV8100
Assigned Data
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
0 = Extension Number
Service Code Specify
(Intercom)
1 = Use Dial
Conversion Table
(default = 0)
0 = Off
1 = On
(default = 0)
0 = Normal
1 = Alarm
(default = 0)
0 = No Message
1 = 01~100 (VRS
Messages)
2 = 01~4 (ACI Group
Number)
3 = 01~64 (Extension
Group Number)
(default = 0)
(Mode 1~8) All Trunks
= Ring Group 1
Direct Inward System Access (DISA)
Level
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents