NEC Univerge SV8100 Features And Specifications Manual page 1276

Issue 1.0
4. Select one of the following options:
L (5) = Listen to the current Directory Dialing Message (if any)
= Exit listen mode
#
R (7) = Record a new Directory Dialing Message
= Pause or restart recording
(3) = Erase recording
E
= Exit recording mode
#
E (3) = Erase the Directory Dialing Message
= Go back to the System Administrator options
#
Using Directory Dialing:
1. After the Automated Attendant answers, wait for the Directory Dialing Message.
The Automated Attendant may ask you to dial a digit for Directory Dialing.
2. Dial the letters that correspond to the name of the person you wish to reach +
The Directory Dialing Message tells you how many letters you need to dial, and whether you
should enter the person's first name or last name.
To exit Directory Dialing without selecting a name, just dial
3. The Automated Attendant announces the name matches, and tells you which digit to dial (1~3) to
reach each of the announced names.
To hear additional name matches (if any), dial 6 instead.
4. After you make your selection, the Automated Attendant will route your call to the name you select.
2 - 1252
UNIVERGE SV8100
.
#
.
#
VM8000 InMail