Sv8100 Netlink - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
The NetLink feature allows up to 16 sites to be linked together over a Data Communication IP NetLink that
allows Remote Sites to have the same service features as at the Main Site, acting as one system.
Systems can be installed separately in the same building or in remote offices connected via a qualified IP
network.
With NetLink, the maximum system capacity still applies (200 Trunks and 512 Stations), but the ports can
be distributed between sites using an SV8100 CHS2U-AU chassis at each location.
Each site requires a PZ-(X)IPLA daughter board and a PZ-ME50-AU Memory Expansion Board to be
installed on its CD-CP00-AU blade. The CD-CP00-AU blade at each Remote Site must have the same
data as the Main Site CD-CP00-AU blade. The Main Site automatically uploads the system data to the
Remote Sites anytime the data is changed.
The Main Site requires a proper LK-SYS-NETLINKX-LIC license for each Remote Site.
When a communication failure occurs between the Main Site and any Remote Site, the Main Site
CD-CP00-AU blade automatically changes to survival mode and operates as a stand-alone system. If
multiple Remote Sites are installed, a Remote Site can be assigned as a temporary Main Site to control
remaining connected sites.
Conditions
The Primary System (Main Site) requires the appropriate NetLink licenses dependant upon
the number of nodes in the NetLink network.
Up to 16 Nodes can be supported in a NetLink network at R1.
A maximum of 240 Virtual slots are supported.
Port assignment is performed sequentially by the requested order from the Secondary
Systems.
It is recommended that all nodes in a NetLink network have the same main CD-CP00-AU
software.
When a Terminal is placed on hold, the Music on Hold comes from the system that the
Terminal resides in.
When a trunk is placed on hold, the Music on Hold comes from the system that the trunk
resides in.
External Paging uses an output on the CD-CP00-AU of the Primary System.
During a fail-over, the Secondary (Remote) sites will utilize the 10 day license.
SV8100 Features and Specifications Manual

SV8100 NetLink

Issue 1.0
2 - 1029