NEC Univerge SV8100 Features And Specifications Manual page 1150

Issue 1.0
Program
Program Name
Number
14-07-01 Trunk Access Map Setup – Trunk
Port Number
15-06-01 Trunk Access Map for Extensions
15-07-01 Programmable Function Keys
21-02-01 Trunk Group Routing for
Extensions
21-15-01 Individual Trunk Group Routing
for Extensions
2 - 1126
Description/Comments
Access Map programming may limit
Trunk Group Routing options.
Access Map programming may limit
Trunk Group Routing options.
Assign a function key for Trunk
Group Routing access (code 02 +
#
trunk group ).
Assign the trunk routes to
extensions.
Designate the trunk route accessed
when a user dials the Alternate
Trunk Route Access Code
assigned in Program 11-09-02.
Trunk Group Routing is set up in
Program 14-06.
UNIVERGE SV8100
Assigned Data
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is on
Hold).
Trunk Access Maps:
1~200
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Trunk Group Routes:
1~100
Day/Night Mode: 1~8
Route Table Number:
0~100
(0 = No Setting)
(default = 1)
Trunk Group Routes:
1~100
0~100
(0 = No Setting)
(default = 0)
Trunk Group Routing
Level
1 2 3